Sign In | Join Free | My frbiz.com
China Deligreen Power Co.,ltd logo
Deligreen Power Co.,ltd
Make DIY Battyer Easier!
Verified Supplier

4 Years

Home > Battery Management System BMS >

16S 40A Lifepo4 48V Battery Management System BMS

Deligreen Power Co.,ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

16S 40A Lifepo4 48V Battery Management System BMS

  • 1
  • 2
  • 3

Brand Name : Deligreencs

Model Number : LFP16S48V40A

Certification : CE/UL/ROHS/FCC

Place of Origin : China

MOQ : 1

Price : Negotiable

Payment Terms : D/A, D/P, T/T, Western Union

Supply Ability : 1000 pcs/day

Delivery Time : 10 days

Packaging Details : carton

Application : 16S LifePO4 Battery Pack

Max charge voltage : 60V

Over charge volt : 3.75±0.05V

Over charge release : 3.55±0.05V

Over discharge volt : 2.2±0.1V

Over discharge release : 2.7±0.05V

Constant discharge current : 40A

Peak discharge current : 120±20

Charge current : 20A as default

Port : same port for charge and discharge

Balance current : 35±5mA

Temp sensor : Can be customized

Balance method : Passive balance

Waterproof : IP66

Contact Now

Product: Deligreencs Lithium Battery Management 16S40A Lifepo4 BMS 48V Lithium Battery Charge Current 20A With Over Current Protection

(For 3.2V rated LiFePO4 battery pack only)

◆ We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
◆ The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, etc.
For Need the temperature protection function , Please contact us to add the temperature sensor.
◆ According to the customer request we can develop PCM in different sizes and structures.
◆ BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.
Our Advantage
◆ Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan. IC itself has power balancing function. The circuit is simple and reliable.

◆ Strong load ability, constant discharge current 100A 120A 200A 250A, , use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.

◆ Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.
◆ Extreme low power consumption. The consumption of the whole device is less than 50uA.
◆ PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
Important Features of the BMS

16S 40A Lifepo4 48V Battery Management System BMS

Basic Specification of the bms

Datasheet for 3.2V LifePO4 BMS( 10A-60A )
Content Spec Unit Remark
10A 15A 20A 30A 40A 50A 60A A
Discharge Constant discharge current 10 15 20 30 40 50 60 A
Over-discharge current protection 30±5 50±5 60±10 100±20 120±20 150±30 180±30 A
Charge Charge voltage Series No.* 3.65 V
Charge current 5 8 10 15 20 25 30 A Common port
Charge current 8A as default A Separate port
Over charge protection Overcharge volt 3.75±0.05 V
Overcharge volt protect delay 1 S
Over charge volt release 3.55±0.05 V
Power balancing Power balance volt 3.5 V
Balance release volt 3.5 V
Balance current 30±5 mA
Over discharge protection Over discharge detect volt 2.2±0.05 V
Over discharge detect delay 1 S
Over discharge volt release 2.7±0.05 V
Over current protection Over current detect delay 1 MS
Over current protect release Off load
Short circuit protection Short circuit protection External load short circuit
Short circuit detect delay 250 uS
Short circuit detect release Disconnect load
Temperature protection Temp protection charge0, discharge70 Need extra customization
Resistance Main circuit resistor ≤20
Self-consumption Working current ≤100 uA
Sleepy current(when battery is over discharged ) ≤20 uA
Working temp Temp range -20~70
Storage temp Temp range -40~80

Wire speficication

Current Wire Square
10-15A 16AWG 1.3mm²
20A 14AWG 2mm²
30A 12AWG 3.4mm²
40A-60A 10AWG 5.3mm²
80A 8AWG 8.3mm²
100A 7AWG 12mm²
120A-150A 6AWG 16mm²
200A-250A 6AWG*2 16mm²*2
400A 2AWG*2 35mm²*2

Different wiring for common port and separate port

16S 40A Lifepo4 48V Battery Management System BMS

BMS wiring directions

First, Preparation before installation.

Make sure the batteries are of good consistency.The volt difference is no more than 0.05V,inner resistance is no more than 5mΩ,capacity difference lower than 30mAh. Connect the batteries in parallel first and then in series.the better performance of batteries consistency is, the higher performance of the BMS.

Second, wiring instructions.

Attention: please use our wires for our BMS.Don’t use other factories’ wires which can’t match with our BMS.

Step 1 B-(blue thick wire): Connect to battery pack total negative pole -

Step 2, Disconnect the wires for batteries from the BMS side.

Step 3,Connect the wires to batteries. Start from the thick black wire to total negative pole(B1-),then connect the 2nd red thin wire to the 1st battery positive pole(B1+)

B2+,B3+B4+......till the last red thick wire.

Step 4,Finishing all the wires to each batteries,don’t plug into the BMS directly. We suggest you use multimeter measure the voltage of two adjacent metal terminals(You can see the white connector with silver metal pins on the BMS).if the voltage is 3.0~4.2V(LiNCM),2.0~3.6V(LiFepo4), 1.5~2.75V(LTO),which means the wiring is correct.

Step 5,Ensure the wires are connected to batteries correctly, all voltage is normal, you can plug the wires into the BMS.

Step 6 P-: Connect P-(black thick wire) to load - and charger -

(if you ordered “common port”)

Charger+ connect to C-(yellow wire) load+ connect to P-(Black thick wire)

(if you ordered “separate port”)

Step 7 charger+ and load+ connect to battery +,please use thick wire

Third, Measure the total volt of the pack, and the output voltage of the BMS.if the voltage is the same,it means the wiring is correct.You can use the BMS now. Otherwise please check the wiring again according to the tips above.

How to test if the bms is good or not?

1. Make sure to use the attached detective wires of our bms.

Ensure volt-detect red wires are connected correctly.

2. Connect the wire to the battery pack,measure the voltage through the wire,it should be equal with the voltage of each cell.

If the votage is different,it means wrong wiring.

3. Make sure the voltage is same,plug the bms in.Make the multimeter point to Ω, measure the resistance between P- and B-. If the resistance is 0, then the BMS is good.

16S 40A Lifepo4 48V Battery Management System BMS

Application

16S 40A Lifepo4 48V Battery Management System BMS


Product Tags:

16S 48V 40A Battery Management System BMS

      

48V Lifepo4 Battery Management System BMS

      

48V Lifepo4 bms module

      
China 16S 40A Lifepo4 48V Battery Management System BMS wholesale

16S 40A Lifepo4 48V Battery Management System BMS Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Deligreen Power Co.,ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Help

Copyright © 2009 - 2024 frbiz.com. All rights reserved.